The HEE WING T1-S Ranger VTOL PNP FPV Airplane 790mm EPP FPV Gray - With Case (Model: T1-S-VTOL-PNP) is a compact, modular vertical take-off and landing (VTOL) fixed-wing FPV platform engineered for runway-free launches, confined-space operations, and long-range forward cruising. Expanding upon the original T1 Ranger airframe with a 790mm wingspan and 715mm fuselage length, the T1-S VTOL utilizes a tricopter tilt-rotor propulsion layout—combining two front wing-mounted tilting brushless motors with a rear tail-boom vertical lift motor—to hover and transition seamlessly between multicopter and efficient forward wing flight.
Molded from crash-resistant EPP foam in an FPV Gray finish, the airframe features an enlarged internal fuselage bay capable of housing digital HD video transmitters (such as DJI O3/O4 Air Units or Walksnail Avatar), a VTOL-capable flight controller, GPS/compass hardware, and high-capacity 4S batteries. Designed for tool-free field deployment, it incorporates snap-fit detachable main wings with integrated quick-disconnect wiring plugs, a quick-release carbon tail boom, upper-mounted aileron servos that stay clear of ground strikes, and a reinforced hatch lock. Supplied as a Plug-and-Play (PNP) airframe package without a flight controller (T1-S-VTOL-PNP), it arrives pre-assembled with three 1806 2000KV motors, three HEE WING 20A BLS ESCs, two V39 metal-gear tilt servos, three 4.3g control surface servos, and 5126 propellers inside a custom-molded EPP foam carrying case.
Tricopter Tilt-Rotor VTOL Propulsion: Pairs two front wing-mounted tilting 1806 2000KV motors driven by V39 metal-gear tilt servos with a rear tail-boom lift motor for vertical takeoffs, stationary hovering, and efficient forward flight transitions.
Expanded 790mm Wingspan & Enlarged Avionics Bay: Increased wingspan and fuselage volume improve glide efficiency and accommodate VTOL flight controllers, GPS modules, FPV VTX systems, and 4S battery packs.
Tool-Free Modular Quick-Release Assembly: Snap-fit main wings with integrated electrical quick-disconnect plugs and a quick-release carbon tail boom enable rapid field setup and breakdown without tools.
Upper-Mounted Aileron Servo Layout: Positions aileron servos and linkages on the upper wing surface to prevent damage from grass, brush, and uneven landing zones.
Pre-Installed VTOL Drive & Tilt Hardware: Ships factory-equipped with three 1806 2000KV brushless motors, three 20A BLS ESCs, two V39 tilt servos, three 4.3g surface servos, and 5126 propellers.
Custom Molded EPP Travel & Storage Case: Arrives inside a form-fitting EPP foam carrying case that protects the fuselage, tilt nacelles, wings, and tail assembly during transport.
Manufacturer Model / SKU: T1-S-VTOL-PNP
Completion Level: Plug-and-Play (PNP — Motors, ESCs, Tilt Servos, and Control Surface Servos pre-installed; VTOL Flight Controller, GPS, Receiver, Battery, and FPV gear required)
VTOL Configuration: Tricopter Tilt-Rotor (2x Front Tilting Wing Motors + 1x Rear Tail Lift Motor)
Airframe Material: Molded EPP Foam with Carbon Fiber Reinforcement Spars & Tail Boom
Color Finish: FPV Gray
Wingspan: 790 mm
Fuselage Length: 715 mm
Takeoff Weight Range: 600 g – 950 g (depending on battery and FPV payload configuration)
Motors: (3) 1806 2000KV Brushless Motors (2x Front Tilting, 1x Rear Tail Lift)
Electronic Speed Controllers (ESCs): (3) HEE WING 20A BLS Brushless ESCs
Tilt Servos: (2) HEE WING V39 Metal-Gear Digital Tilt Servos (with metal tilt mounts)
Control Surface Servos: (3) 4.3g Micro Servos (2x Upper-Mounted Aileron, 1x Elevator)
Propellers: (3) 5126 (5.1" x 2.6") 2-Blade Propellers
Recommended Battery: 4S LiPo (1300mAh–2200mAh) or 4S Li-Ion (3000mAh–4000mAh) (4S power required; lower cell counts not supported for VTOL hover)
Transport Case: Custom-Molded EPP Storage & Transportation Foam Case (Included)
(1) HEE WING T1-S Ranger VTOL Molded EPP Fuselage (with pre-installed power distribution board and hatch)
(1) Left Main Wing (with pre-installed 1806 2000KV motor, V39 tilt servo mechanism, 20A BLS ESC, 4.3g aileron servo, and quick-release plug)
(1) Right Main Wing (with pre-installed 1806 2000KV motor, V39 tilt servo mechanism, 20A BLS ESC, 4.3g aileron servo, and quick-release plug)
(1) Carbon Fiber Tail Boom Assembly (with pre-installed rear 1806 2000KV lift motor, 20A BLS ESC, and 4.3g elevator servo)
(1) Horizontal Tail Stabilizer
(1) Vertical Tail Fin
(1) Carbon Fiber Main Wing Spar Rod
(1) Propeller Set containing (3) 5126 Propellers
(1) Battery Mounting Plate
(1) Control Linkage & Hardware Accessories Bag (control horns, linkage rods, horn buckles)
(1) Custom-Molded EPP Storage & Transportation Foam Case
(1) T1-S VTOL PNP Assembly Guide
(1) VTOL-Capable Flight Controller & GPS/Compass Module (e.g., HEE WING FX-405 VTOL Stabilizer Pack or SpeedyBee F405 Wing / Matek F405-VTOL running ArduPilot or INAV with QLoiter/VTOL firmware)
(1) 6-Channel or Greater Radio Transmitter and Compatible RC Receiver (e.g., ExpressLRS, TBS Crossfire, or SBUS)
(1) 4S LiPo or 4S Li-Ion Flight Battery (1300mAh–4000mAh recommended; 4S voltage required for VTOL operation)
(1) Compatible 4S LiPo/Li-Ion Balance Battery Charger
(Optional) FPV Camera, Video Transmitter (Digital HD or Analog), and FPV Goggles / Monitor
(Optional) Foam-Safe CA Glue (for securing control horn buckles during final assembly)
| Name | Value |
|---|---|
| MANUFACTURER | Hee Wing |
| GTIN | 723326382659 |