Emax Tinyhawk Nanoscout Pro - ELRS 2.4GHz BNF Micro Whoop Analog FPV Drone
by EMAX

The EMAX Tinyhawk Nanoscout Pro ELRS 2.4GHz BNF Micro Whoop is a 65mm ultra-compact analog FPV drone engineered for indoor proximity flying, racing, and backyard freestyle. Built around a durable 65mm duct-protected frame, the Nanoscout Pro delivers locked-in agility and impact resistance in a lightweight package.

Equipped with a 5-in-1 AIO flight controller, the drone integrates an MCU processor, a 4-in-1 6A–8A ESC, a built-in ExpressLRS 2.4GHz receiver, and an adjustable 5.8GHz analog video transmitter capable of up to 400mW output power. Powered by high-RPM 0702 ball-bearing brushless motors spinning Avia 31mm translucent propellers, the Nanoscout Pro offers low latency, high thrust-to-weight ratio, and long-range control compatibility on 1S LiPo power.

Key Features

• 65mm Micro Whoop Frame: High-strength ducted frame architecture provides full propeller protection for indoor proximity flying and crash resilience.

• 5-in-1 AIO Flight Controller: Combines the flight controller, 6A–8A 4-in-1 ESC, SPI ExpressLRS 2.4GHz receiver, and 5.8GHz analog VTX onto a single lightweight board.

• 0702 Brushless Motors: High-KV ball-bearing motors deliver punchy acceleration and responsive throttle control on 1S setups.

• 400mW Adjustable Analog VTX: Switchable power levels (25mW / 100mW / 200mW / 400mW) ensure stable video penetration and clear feed to FPV goggles.

• ExpressLRS 2.4GHz Protocol: Built-in ELRS receiver delivers ultra-low latency and long-range signal reliability with any 2.4GHz ELRS transmitter.

• RunCam Nano FPV Camera: Low-latency analog camera captures crisp visual feedback through tight gaps and changing light environments.

Technical Specifications

• Brand / Manufacturer: EMAX

• Model Identifier: Tinyhawk Nanoscout Pro (BNF)

• Size Class / Wheelbase: 65 mm Micro Whoop

• Flight Controller: 5-in-1 AIO FC (STM32 MCU)

• Onboard Receiver: SPI ExpressLRS 2.4GHz

• Continuous ESC Current: 6A – 8A Continuous 4-in-1 ESC

• Motors: 0702 Brushless Motors (Dual Ball-Bearing)

• Propellers: Avia 31mm Translucent Propellers

• FPV Camera: RunCam Nano 3 / RunCam Nano FPV Camera

• VTX Power Output: 5.8GHz 40-Channel Analog (25mW / 100mW / 200mW / 400mW)

• Power Connector: EM2.0 / 1S High-Current Connector

• Operating Voltage: 1S LiPo / LiHV (3.7V - 4.35V)

• All-Up Weight: ~22.9g (Dry) / ~28.9g (with 1S battery)

What Is Included

• (1) EMAX Tinyhawk Nanoscout Pro ELRS 2.4GHz BNF Micro Drone

• (1) 1S 300mAh / 320mAh LiHV Battery

• (1) USB 1S Battery Charger

• (1) Spare Propeller Set (2 CW, 2 CCW)

• (1) Hardware Tool Set & Quick Start Guide

Needed to Complete

• (1) ExpressLRS 2.4GHz Transmitter or Radio Controller

• (1) 5.8GHz Analog FPV Goggles or Monitor

• Additional 1S LiPo/LiHV Batteries with matching EM2.0/PH2.0 connectors