Holybro Micro M10 GPS With Case IST8310
by Holybro

The Holybro Micro M10 GPS With Case (IST8310, SKU: 12044) is an ultra-compact multi-constellation GNSS module designed for sub-250g FPV quadcopters, micro fixed-wing aircraft, and compact autonomous drones. Powered by 10th-generation u-blox M10 silicon, this micro module concurrently tracks up to four major satellite systems (GPS, GLONASS, Galileo, and BeiDou), delivering fast lock times and high positional stability in challenging signal environments.

Enclosed in a protective molded housing, the SKU 12044 variant integrates an IST8310 digital magnetometer (compass), a high-gain 25x25x4mm ceramic patch antenna, a MAX2659ELT+ LNA RF amplifier, and a low-noise 3.3V regulator. It interfaces with flight controllers using a standard 6-pin JST-GH connector port and features an onboard rechargeable Farah supercapacitor for rapid warm and hot start satellite re-acquisition.

Key Features

• u-blox 10th Gen M10 GNSS Core: Tracks up to 4 concurrent satellite constellations (GPS L1, GLONASS L1, Galileo E1, BeiDou B1) for rapid 3D fix times.

• Integrated IST8310 Digital Compass: Onboard magnetometer supplies accurate heading orientation for INAV, ArduPilot, PX4, and Betaflight navigation modes.

• Active Antenna Architecture: Features a 25x25x4mm ceramic patch antenna paired with a MAX2659ELT+ low-noise RF amplifier (22dB gain) for elevated signal reception.

• Protective Hard Case (SKU 12044): Factory-installed hard enclosure protects internal circuit traces and antenna element against impacts and environmental debris.

• JST-GH 6-Pin Plug-and-Play Port: Standardized 6-pin connector provides simple connection to secondary GPS2 ports on Pixhawk, Betaflight, and INAV flight boards.

• Farah Supercapacitor Backup: Rechargeable capacitance retains ephemeris data to allow instant warm and hot satellite locks.

Technical Specifications

• Brand / Manufacturer: Holybro

• Model Identifier: Micro M10 GPS with Case (IST8310)

• Manufacturer SKU: 12044

• Shopify Variant ID: 42981482922173

• GNSS Chipset: u-blox M10 Series

• Magnetometer / Compass: IST8310 Digital Compass

• Concurrent Constellations: Up to 4 (GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS)

• Frequency Bands: GPS L1, Galileo E1, GLONASS L1, BeiDou B1, SBAS L1, QZSS L1

• Horizontal Positioning Accuracy: 2.0 m CEP

• Navigation Update Rate: Up to 25 Hz (Single GNSS) / Up to 10 Hz (4 Concurrent GNSS)

• Input Voltage: 4.7V – 5.2V DC

• Power Consumption: Less than 200 mA @ 5V

• Interface Port: JST-GH 6-Pin (JST-GH-6P)

• Default Baud Rate: 115200 bps

• Antenna Specifications: 25 mm x 25 mm x 4 mm Ceramic Patch Antenna (1.5 dBi Gain / 22 dB LNA Gain)

• Operating Temperature: -40°C to +80°C

• Dimensions: 34 mm x 28 mm x 11 mm (With Case)

• Net Weight: 16.0 grams (With Case)

• Firmware Compatibility: PX4 v1.14+, ArduPilot v4.3+, INAV v5.0+, Betaflight v4.3+

What Is Included

• (1) Holybro Micro M10 GPS Module with Case & IST8310 Compass (SKU 12044)

• (1) JST-GH 6-Pin to JST-GH 6-Pin Silicone Cable (15 cm)

• (1) JST-GH 6-Pin to Open-Wire Colored Silicone Cable (15 cm)