The Holybro H-RTK ZED-F9P Ultralight RTK GPS Module (SKU: 12078) is a sub-25-gram, multi-band Real-Time Kinematic (RTK) GNSS rover receiver engineered for weight-sensitive autonomous UAVs, mapping drones, VTOL platforms, and precision inspection aircraft. Built around the multi-constellation u-blox ZED-F9P receiver chipset paired with an integrated high-efficiency multi-band helical antenna and an iSentek IST8310 3-axis magnetometer, this airborne rover delivers centimeter-level horizontal positioning accuracy down to 1 cm + 1 ppm without requiring an external ground plane or bulky patch antenna housing.
Concurrently tracking L1 and L2 frequency bands across GPS/QZSS, GLONASS, Galileo, and BeiDou constellations, the H-RTK ZED-F9P Ultralight achieves rapid RTK integer ambiguity resolution and reliable satellite lock in challenging environments. Designed for seamless integration with Pixhawk-standard autopilots running PX4 or ArduPilot, the module features dual JST-GH interfaces—a 10-pin primary port carrying UART1 GNSS telemetry, I2C compass data, and safety/LED/buzzer lines, plus a dedicated 6-pin UART2 port for direct RTCM3 differential correction input. Weighing approximately 21.4 grams (under 25g), it allows smaller commercial and research multirotors to carry survey-grade RTK navigation without sacrificing payload capacity or flight endurance.
Centimeter-Level Multi-Band RTK Accuracy: Powered by the u-blox ZED-F9P dual-frequency GNSS engine to deliver 1 cm + 1 ppm horizontal RTK accuracy when receiving RTCM3 differential corrections from a compatible base station.
Concurrent 4-Constellation L1/L2 Reception: Simultaneously tracks GPS/QZSS (L1C/A, L2C), GLONASS (L1OF, L2OF), Galileo (E1B/C, E5b), and BeiDou (B1I, B2I) signals for fast convergence and high multipath resistance.
Integrated Multi-Band Helical Antenna: High-gain cylindrical helical antenna provides uniform hemispherical reception without needing a bulky metallic ground plane, keeping total weight under 25 grams (~21.4g).
Built-In IST8310 Magnetometer & Pixhawk Safety Suite: Integrates an iSentek IST8310 3-axis compass alongside onboard status LEDs, buzzer, and safety switch signaling over a standard 10-pin JST-GH Pixhawk GPS interface.
Dedicated Dual-UART Architecture: Separates primary flight controller navigation/I2C data (10-pin JST-GH, UART1) from auxiliary RTCM3 correction streams (6-pin JST-GH, UART2) for flexible telemetry and Moving Baseline configurations.
Compact Bottom-Mount Housing: Features three 1.7mm × 4mm bottom mounting holes (compatible with PA2.0×4 or KA2.0×4 self-tapping screws) for rigid installation on GPS masts or airframe decks.
Brand / Manufacturer: Holybro
Model Identifier: H-RTK ZED-F9P Ultralight (Rover RTK GNSS Module)
Manufacturer SKU / Part Number: 12078 (Supersedes Legacy SKU: 12053)
System Role / Application: Airborne / Vehicle Rover
GNSS Receiver Chipset: u-blox ZED-F9P
Magnetometer / Compass: iSentek IST8310 (I2C)
Supported Satellite Constellations: GPS / QZSS, GLONASS, Galileo, BeiDou
Supported Frequency Bands:
GPS / QZSS: L1C/A, L2C
GLONASS: L1OF, L2OF
Galileo: E1B/C, E5b
BeiDou: B1I, B2I
Antenna Type: Integrated Multi-Band Helical Antenna
Horizontal Positioning Accuracy:
RTK Fixed: 1 cm + 1 ppm (within 30 km baseline; adds ~1 cm per 10 km from base)
DGNSS: 0.5 m CEP
Autonomous (Standalone): 2.0 m CEP
Velocity Accuracy: 0.1 m/s (GNSS) / 0.05 m/s (D-GNSS)
Time Pulse Signal Accuracy: 30 ns RMS
Receiver Sensitivity:
Tracking & Navigation: -163 dBm
Reacquisition: -147 dBm
Time-to-First-Fix (TTFF):
Cold Start: 35 s
Warm Start: 20 s
Hot Start: 1 s
Maximum Navigation Update Rate (GPS-Only Mode):
RAW Observations: Up to 25 Hz
RTK Positioning: Up to 20 Hz
Moving Baseline: Up to 8 Hz
UART Baud Rate: 38,400 – 230,400 bps (Default: 115,200 bps)
Hardware Interfaces:
Port 1: 10-Pin JST-GH (UART1 GNSS + I2C Compass + Safety Switch / LED / Buzzer)
Port 2: 6-Pin JST-GH (UART2 Dedicated RTCM3 Correction Input)
Supply Voltage: 5V DC (4.75V – 5.25V via Pixhawk GPS Port)
Operational Limits: Max Dynamics $\le$ 4 g / Max Altitude 18,000 m / Max Velocity 515 m/s
Mounting Pattern: 3× Bottom Mounting Holes (1.7 mm diameter × 4.0 mm depth for PA2.0×4 or KA2.0×4 self-tapping screws; 0.08–0.15 N·m torque)
Net Weight: < 25 grams (~21.4 grams)
Autopilot & Firmware Compatibility: Pixhawk 4, Pixhawk 5X, Pixhawk 6C, Pixhawk 6X, Durandal, Pix32 v6, and CubePilot controllers; PX4 and ArduPilot
(1) Holybro H-RTK ZED-F9P Ultralight RTK GNSS Module (SKU: 12078)
(1) 10-Pin JST-GH Cable (400 mm)
(1) 6-Pin JST-GH Cable (400 mm)
| Name | Value |
|---|---|
| MANUFACTURER | Holybro |