The EMAX E3 3115 Brushless Motor 640KV (Product Code: 0101096119)—part of the EMAX ECO III (E3) propulsion lineup—is a high-torque, external-rotor brushless motor engineered for 8-inch to 10-inch long-range FPV drones, heavy-lift cinelifters, and macro multirotors. Built on a 12N14P electromagnetic framework with a 3115 stator, this 640KV winding is tuned specifically for 6S to 8S LiPo power systems swinging 10-inch propellers, delivering up to 1,888W of peak power and recording up to 4,760 grams of bench thrust at 32V (58.2A) on an HQ 10×5×3 tri-blade propeller.
Constructed with a one-piece CNC-anodized AL 7075 aluminum outer rotor housing, high-temperature N52SH curved arc magnets, and single-strand copper windings, the E3 3115 prioritizes thermal endurance and structural rigidity under sustained heavy payloads. A hardened steel shaft supported by G1-level precision rolling-element bearings transfers rotational loads smoothly to an M5 clockwise propeller adapter thread, while pre-installed 270mm 18AWG silicone motor leads accommodate extended carbon fiber arms.
6S–8S High-Voltage 640KV Windings: Tuned for 6S through 8S LiPo setups driving 10-inch propellers, achieving 64 m$\Omega$ internal resistance and 1,888W peak power output.
Anodized AL 7075 One-Piece Outer Rotor: Precision-machined 7075 aluminum rotor bell resists impact deformation and improves heat dissipation during high-amp climbs.
N52SH Arc Magnets & Single-Strand Windings: High-coercivity N52SH curved magnets paired with single-strand copper windings maintain magnetic efficiency and thermal stability at elevated operating temperatures.
Hardened Steel Shaft & G1 Precision Bearings: 5mm internal steel bearing shaft supported by G1-grade rolling-element bearings ensures smooth, low-vibration tracking for clean flight controller gyro data.
Extended 270mm 18AWG Silicone Leads: Factory-soldered 270mm high-strand silicone wires allow clean routing along long-range and cinelifter arms without wire extensions.
Standard 19x19mm Mounting & M5 Prop Interface: Industry-standard 19x19mm M3 mounting pattern and M5 clockwise prop shaft fit standard macro FPV frames and 10-inch propellers.
Product Code / MPN: 0101096119
KV Rating: 640KV
Stator Size: 3115 (31.0 mm diameter x 15.0 mm height)
Framework / Configuration: 12N14P (External-Rotor Architecture)
Input Voltage / Cell Count: 6S – 8S LiPo
Idle Current (at 10V): 1.2 A
Internal Resistance: 64ohm
Peak Current (at 8S): 59 A
Maximum Power (at 8S): 1,888 W
Max Bench Test Thrust (EMAX Load Sheet): 4,760 g (at 32V / 58.2A / 1,862.4W with HQ 10×5×3 prop)
Rotor Housing Material: Anodized AL 7075 Aluminum Alloy (One-Piece Outer Rotor)
Magnets & Windings: N52SH Curved Arc Magnets; Single-Strand Copper Windings
Shaft Material & Thread: Hardened Steel Shaft; M5 Clockwise (CW) Propeller Thread
Internal Bearing Shaft Diameter: 5.0 mm
Bearing Specification: G1-Level Precision Rolling-Element Bearings
Mounting Bolt Pattern: 19.0 mm x 19.0 mm (M3)
Motor Lead Wires: 270 mm, 18AWG Silicone Wire
Overall Motor Dimensions: $\varnothing$38.8 mm x 48.6 mm
Net Weight: 111.0 grams (excluding silicone wires)
Recommended Propeller Size: 10-Inch Propellers (8-inch to 10-inch range across E3 3115 platform)
Target Applications: 8"–10" Long-Range FPV Drones, Heavy-Lift Cinelifters, and X-Class / Macro Multirotors
(1) EMAX E3 (ECO III) 3115 640KV Brushless Motor
(5) M3 x 10mm Mounting Screws
(1) Aluminum M5 Nylock Propeller Nut
(1) Propeller Shaft Screw
(1) Shaft Washer
| Name | Value |
|---|---|
| MANUFACTURER | EMAX |
| STATOR DIAMETER | 31 |
| STATOR HEIGHT | 15 |
| KV | 640 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |
| GTIN | 769283960394 |