Upgrade your receiver with this genuine Comtech module made specifically for Ready Made RC. This unit has a bandwidth of 18MHz vs the standard 27MHz found in most receivers. This means that it comes from the factory with the upgraded SAW filter already installed!
Specfifcations:
Input frequency range | 900.0MHz-2150.0MHz | |
One input connector | SMA | |
Nominal input impedance | 75 Ohm | |
Tuning circuit | Built in PLL | |
IF frequency | 479.50 MHz center | |
IF band width | 18 MHz nominal | |
Demodulation | Phase locked loop | |
Vedio output polarity | Positive going | |
Operating voltage | +28V(+/-5%)(tuing) | +5v (+/-5%)(B+) |
Operating temprature | -10OC~+60OC | |
Operating humidity | Less than 80% R.H. (at 40OC) | |
Storage temperature | -20OC~+70OC | |
Storage humidity | Less than 95% R.H. (at 40OC) | |
Input level | -60~-30dBm |
Manual and further specifications found HERE.
-----------------------------------------------------------------------
***Notes from this post
From left to right, antenna on the left side, "ComTech" brand (and white BSS479LAIDFM sticker) on top.
__------------
Antenna-__ |
| |
|___________|
1 234 56789
1 -> LNB or LNA power supply (only needed if you want to feed a preamp powered by coax cable)
2 -> Analog 0-5V RSSI level
3 -> 5V regulated logic power
4 -> Baseband out (mixed video + sound subcarrier)
5 -> I2C DATA
6 -> 9V PLL charge pump power (>9V for >1500MHz!)
7 -> I2C CLOCK
8 -> not needed (PLL programmable out)
9 -> not needed (PLL programmable out)
Name | Value |
---|---|
MANUFACTURER | RMRC |
FREQUENCY BAND | 1.3 GHz, 900 MHz |
GOGGLES MODULE? | No |
Contact us on Facebook Messenger Contact us via email at support@readymaderc.com