The Moka Berserker is a 220mm frame. It is designed specifically for the highest level of drone racing competition. Its design features make it faster and more agile than most of the frames on the market, yet making no compromise for strength and durability.
1. Place as much mass as possible close to the axes of roll and pitch rotation.
2. Keep AUW “all up weight” low as possible while allowing for high power output. Dry frame weight is 96 grams and 134 grams with all fasteners
3. Different mounting options for the arms, allowing for the center of thrust to be placed at the center of gravity
Specification and Features
- Dry frame weight is 96 grams ( without hardware)
- Assembled weight possible of 426 grams W/O HD camera or lipo.
- Ideal center of gravity location.
- Rigid bracket system for arms configuration.
- Symmetric weight distribution front-rear and side-side.
- Super low top fuselage deck keeps mass as low as possible
- Durable robust design that is highly resilient to crashes.
- 220mm frame size optimized for 2204 to 2208 motors paired with 5″ props
- Different arm options: 250mm (6″ props), 220mm (5″ props)
- High quality twill weave 3K matt carbon fiber construction.
- High quality anodized aluminum frame brackets and standoffs.
- Arms are 4mm thickness.
||6” (152mm) and (2) blades
This is our newer Berserker race frame designed from the ground up to win. It features lightweight design and low surface area to maximise your forward kinetic energy.
Key features are:
Thick CF Arms 4mm and 1.5mm for bottom plate and 2mm for top plate
16mm wide arms
Extensive protection for camera
Lower deck 20mm profile for strength
Innovative structural system and component layout.
M3x20mm and M2.5x20mm aluminium fasteners to reduce weight.
Supports 2208 motors and 6in props
Up to 30 degrees camera tilt
Further information on RCgroups
The package includes:
CF Top Plate : 2mm
CF Bottom Plate : 1.5mm
CF Camera Support Plate: 1.5mm .
CF arms 4mm thickness with motors patterns M2x12mm , M3x16mm and M3x19mm.
4 x Anodized arms support system
1x camera mount for fatshark 600 or 700TVL
The frame does not include motor mount screws or washers. We recommend alu hex cap screws and alu washers to mount your motors.