Holybro PM02 V3 Power Module (12S)
by Holybro

The Holybro PM02 V3 Power Module (12S) is a robust, analog power management solution designed to provide clean, regulated power to flight controllers while delivering critical real-time battery telemetry. Engineered for versatility, it supports a wide input range from 2S to 12S LiPo (up to 60V), making it suitable for a broad spectrum of unmanned systems, from lightweight 5-inch drones to high-voltage industrial sUAS. The module utilizes an on-board switching regulator to output a stable 5.2V at up to 3A, ensuring reliable operation for the autopilot, GPS, and telemetry radios.

This V3 iteration comes pre-assembled with XT60 connectors and high-quality 12AWG silicone wires, significantly reducing build time and complexity. It features an integrated current sensor capable of measuring up to 120A and provides battery voltage monitoring via a reliable analog signal. Designed for professional reliability, the PCBA is wrapped in protective shrink tubing and includes a pre-soldered 220uF 63V capacitor to filter out high-frequency electrical noise. For university research teams and tactical drone integrators, the PM02 V3 offers a plug-and-play power foundation for heritage Pixhawk and Durandal systems, ensuring precise energy monitoring during mission-critical flight operations.

Specifications

• Input Voltage: 2S – 12S LiPo (Max 60V)

• PCB Continuous Current: 60A

• PCB Burst Current: 100A (<60 seconds)

• Max Current Sensing: 120A

• Output Voltage: 5.2V DC

• Max Output Current: 3A

• Voltage Divider: 18.182

• Amperes per Volt: 36.364

• Communication: Analog Output (via 6-pin cable)

• Main Connectors: XT60 (Pre-soldered)

• Wire Gauge: 12 AWG Silicone

• Weight: 20g

• Mounting Compatibility: APM, Pix32, Pixhawk, Pixhawk 4, Pixhawk 4 Mini, Durandal

What is Included

• 1x PM02 V3 Power Module (Pre-soldered with XT60 Connectors)

• 1x Electrolytic Capacitor: 220uF 63V (Pre-soldered)

• 1x Molex 6-Position Connector Cable (15 cm)

• 1x JST-GH 6-Position Connector Cable (15 cm)

Important Compatibility Note: This power module uses analog data output and is specifically designed for flight controllers like the Pixhawk 4 or Durandal. It is not compatible with the Pixhawk 5X or 6X series, which require a digital power module (such as the PM02D).