Triumph Lucid 90A 3-12S AM32 ESC - NDAA - Made in USA
by Triumph Manufacturing

Power high-voltage airframes, heavy-lift platforms, and large cinelifters with the high-performance Triumph Lucid 90A 3-12S AM32 ESC. Manufactured in the United States by Triumph Manufacturing Corporation, this NDAA-compliant single electronic speed controller handles extreme high-voltage input ranging from 3S up to 12S LiPo. Built on an advanced 8-layer high-current-density PCB with integrated TVS surge protection, the Lucid 12S ESC provides exceptional thermal stability and voltage spike defense without requiring heavy external heatsinks.

Engineered for extreme current density and maximum reliability, this high-voltage ESC supports key operational sectors:

• sUAS Contractors & Defense Operations: Built in the USA to comply with strict NDAA procurement standards, providing government agencies, tactical integrators, and heavy-payload UAV operators with a secure, ultra-reliable 12S power stage.

• Cinelifter Pilots & Long-Range Explorers: Delivers up to 90A continuous and 120A burst output for driving large motors and props up to 15 inches on cinema rigs, long-range wings, and high-voltage X-Class multirotors.

• Educational & STEM Aerospace Programs: Gives university flight research teams and engineering laboratories a high-voltage testbed platform running open AlkaMotors32 (AM32) firmware to analyze motor commutation curves and high-voltage power distribution.

Design Insight: The Triumph Lucid 12S ESC is engineered without an onboard BEC to guarantee complete electrical isolation between high-voltage battery spikes (up to 50V+) and sensitive flight controller electronics. Built-in TVS protection diodes actively absorb back-EMF voltage spikes generated during high-RPM braking.

Key Features:

• NDAA Compliant & Made in USA: Manufactured in the United States to satisfy strict national defense supply chain regulations and federal procurement guidelines.

• High-Voltage 3S to 12S Architecture: Broad battery voltage compatibility allows seamless operation on high-efficiency 8S, 10S, and 12S heavy-lift power setups.

• AM32 Firmware Calibration: Pre-flashed with AlkaMotors32 firmware for fast motor startup, high-voltage timing optimization, and bi-directional DShot execution.

• 8-Layer High Current PCB: Advanced thermal management disperses heat evenly across structural copper layers, delivering high power-to-weight performance.

• Integrated TVS Spike Suppression: Onboard Transient Voltage Suppressor prevents high-voltage transient spikes from damaging sensitive electronics.

Technical Specifications:

• Manufacturer: Triumph Manufacturing Corporation (USA)

• Compliance Standard: NDAA Compliant (National Defense Authorization Act)

• Input Voltage: 3S - 12S LiPo (11.1V to 50.4V DC)

• Rated Current: 70A (60 seconds continuous), 90A (40 seconds continuous)

• Peak Burst Current: 120A (30 seconds)

• ESC Software / Target: AlkaMotors32 (AM32)

• Control Protocols: Bi-directional DShot 300 / 600, KISS ESC Telemetry

• PCB Construction: 8-Layer High Current Density PCB with TVS Protection

• Onboard BEC: None (Pure power isolation)

• Telemetry Output Port: Yes

• Propeller Compatibility: Up to 15" (Airflow required for 7"+ props)

• Dimensions: 57.75 mm x 29 mm

• Weight: 19 grams (excluding wires and capacitors)

What is Included:

• (1) Triumph Lucid 90A 3-12S AM32 ESC (NDAA - Made in USA)

• (1) 3-Color Signal Cable Assembly (PWM / DShot / Serial)

• (2) 330μF 12S Low-ESR Capacitors

• (1) Transparent Heat Shrink Tube

• (1) 12AWG Power Cable with XT60 Connector

Recommended Items & Needed to Complete (Available at ReadyMadeRC):

• Flight Controllers: Pair with an NDAA-compliant flight computer like the Triumph Lucid H7 Flight Controller V2.

• Power Cabling: Route high-voltage power to your ESC arms using RMRC Premium Silicone Wire 12 Gauge.

• Wire Insulation & Protection: Protect heavy solder junctions and capacitor leads using 8mm or 12mm PE Black Heat Shrink.