Holybro PIX32 V6 Mini Baseboard Cable Set 18059
by Holybro

The Holybro PIX32 V6 Mini Baseboard Cable Set (SKU: 18059) is a dedicated avionics wiring harness kit engineered specifically for the Pix32 v6 Mini Baseboard (SKU: 18057) and compact Pix32 flight control installations. Designed to route power, telemetry, navigation, and bus signals within tight fuselage layouts, this kit utilizes Dronecode-standard JST-GHR (1.25mm pitch) latching connectors, ultra-flexible silicone wire, and specialized Y-splitter breakout leads.

Unlike full-size carrier wiring packs, the Mini Baseboard Cable Set includes dual 6-pin to dual-4-pin "Y" splitter cables that break out shared telemetry and I2C lines directly to individual peripherals without external soldering or complex custom harnesses. The set also supplies an external multi-port CAN/I2C splitter hub to daisy-chain additional sensors, high-flexibility 4-to-4 pin bus cables, 6-to-6 pin power and serial leads, an FMU debug connection, and a direct USB Type-C ground interface cable.

Key Features

• Tailored for Pix32 V6 Mini Baseboard: Pin-compatible with the compact port layout of the Holybro Pix32 v6 Mini Baseboard (SKU: 18057).

• Integrated CAN / I2C Splitter Hub: Includes an ultra-compact bus distribution board for expanding onboard I2C and DroneCAN peripheral connectivity.

• Dedicated 6-to-Dual-4-Pin "Y" Harnesses: Pre-wired breakout cables split combined 6-pin telemetry and I2C ports into dedicated 4-pin latching connections for compasses and serial devices.

• Vibration-Resistant JST-GHR Latching Connectors: Positive-locking 1.25mm GHR connectors prevent loose connections caused by motor oscillation and high G-forces.

• Complete Avionics Coverage: Supplies all necessary lines for analog power module sensing, serial telemetry modems, FMU SWD debugging, RC inputs, and flight controller programming.

• High-Flexibility Multi-Strand Wire: Pliable silicone insulation allows clean routing through narrow airframes, gimbal mounts, and micro drone bays.

Technical Specifications

• Brand / Manufacturer: Holybro

• Model Identifier: PIX32 V6 Mini Baseboard Cable Set (Cable Set 2)

• Manufacturer SKU / Part Number: 18059

• Target Baseboard Compatibility: Holybro Pix32 V6 Mini Baseboard (SKU: 18057)

• Secondary Compatibility: Holybro Pix32 V5 Mini Carrier Board

• Conductor Type: High-Flexibility Multi-Strand Tinned Copper

• Insulation Material: High-Temperature Flexible Silicone

• Connector Pitch & Types:

  • JST-GHR 1.25mm Pitch Latching Connectors (Power, Telemetry, CAN, I2C)

  • JST-SH 1.00mm Pitch 6-Pin Connector (FMU Debug)

  • 2.54mm (0.1") DuPont 3-Pin Female Headers (PPM / RC-IN)

  • USB Type-A to USB Type-C Interface Cable

• Included Expansion Hardware: 1x Passive CAN / I2C Splitter Hub Board

• Nominal Harness Length: ~150 mm

• Net Weight (Complete Kit): ~32.0 grams

What Is Included

• (1) CAN / I2C Splitter Board

• (2) JST-GHR 1.25mm 4-Pin to 4-Pin Cables (CAN & I2C)

• (3) JST-GHR 1.25mm 6-Pin to 6-Pin Cables (Power & Telemetry)

• (1) JST-SH 1.0mm 6-Pin to 6-Pin Cable (FMU Debug)

• (2) JST-GHR 1.25mm 6-Pin to Dual 4-Pin "Y" Cables (Telemetry & I2C)

• (1) DuPont 2.54mm 3-Pin to 3-Pin Cable (PPM / RC-IN)

• (1) USB Type-A to USB Type-C Cable