The Holybro Pix32 v6 Flight Controller Module (SKU: 11056) is a modular, high-performance autopilot core built on the PX4 FMUv6C open-hardware architecture for commercial multirotors, fixed-wing aircraft, VTOL platforms, and unmanned ground vehicles (UGVs). Powered by a 480 MHz STM32H743 32-bit Arm® Cortex®-M7 Flight Management Unit (FMU) with 2MB Flash and 1MB SRAM alongside a dedicated 72 MHz STM32F103 Arm® Cortex®-M3 failsafe I/O co-processor, the Pix32 v6 delivers ample computational headroom for complex autonomous waypoint navigation, sensor fusion, and real-time flight control.
Designed for maximum airframe integration flexibility, the Pix32 v6 separates the flight controller core from the carrier baseboard via a high-density 100-pin Panasonic AXK5S-6S mezzanine connector, enabling seamless installation onto Holybro Pix32 v6 Standard/Mini baseboards or custom OEM carrier PCBs. Inside its low-profile 44.8 × 44.8 × 13.5 mm CNC aluminum housing (36g), dual redundant IMUs (InvenSense ICM-42688-P and Bosch BMI088) are mounted on an integrated internal vibration-isolation system and thermally stabilized by onboard heating resistors to maintain peak gyro accuracy across harsh vibration and extreme ambient temperature swings.
Dual-Processor STM32H743 + STM32F103 Architecture: Combines a 480 MHz Arm® Cortex®-M7 FMU (2MB Flash, 1MB SRAM) with an independent 72 MHz Arm® Cortex®-M3 I/O co-processor for deterministic failsafe handling and high-rate flight control loops.
Redundant Dual-IMU Sensor Suite: Integrates an InvenSense ICM-42688-P accelerometer/gyroscope, a Bosch BMI088 accelerometer/gyroscope, an iSentek IST8310 magnetometer, and a TE Connectivity MS5611 barometer for hardware-level sensor redundancy.
Integrated Vibration Isolation & IMU Heating: Internal mechanical damping filters out high-frequency airframe resonance, while onboard heating resistors regulate IMU operating temperatures for consistent sensor calibration in cold or fluctuating climates.
Modular 100-Pin Carrier Board Interface: Connects to Holybro Pix32 v6 Standard/Mini baseboards, legacy Pix32 v5 baseboards, or custom user-designed carrier boards via a 100-pin Panasonic AXK5S-6S board-to-board connector.
Extensive I/O & Peripheral Expansion: Exposes 16 PWM outputs (8 I/O + 8 FMU), dual CAN buses, 3 telemetry UARTs, dual GPS ports, I2C, dual analog power monitor inputs, and dedicated SBUS/DSM RC interfaces through the 100-pin bus.
Pre-Flashed PX4 & ArduPilot Compatibility: Ships pre-loaded with PX4 FMUv6C firmware (supporting PX4 v1.13.2+ and ArduPilot v4.2.3+) for immediate configuration in QGroundControl or Mission Planner.
Model Identifier: Pix32 v6 Flight Controller Module (FC Module Only)
Hardware Architecture: PX4 FMUv6C Variant (Modular Core)
FMU Processor: STMicroelectronics STM32H743 (32-Bit Arm® Cortex®-M7, 480 MHz, 2MB Flash Memory, 1MB SRAM)
I/O Co-Processor: STMicroelectronics STM32F103 (32-Bit Arm® Cortex®-M3, 72 MHz, 64KB SRAM)
On-Board Sensors:
IMU 1 (Accel/Gyro): InvenSense ICM-42688-P
IMU 2 (Accel/Gyro): Bosch BMI088
Magnetometer: iSentek IST8310
Barometer: TE Connectivity MS5611
Thermal & Vibration Management: Integrated Internal Vibration Isolation System + Onboard IMU Temperature-Control Heating Resistors
Carrier Board Connector Type: 100-Pin Panasonic AXK5S-6S Mezzanine Connector
Maximum Input Voltage: 6.0V DC
USB Power Input Voltage: 4.75V – 5.25V DC
Servo Rail Input Voltage: 0V – 36V DC
Output Current Limiters: Telem1 Max Output Current Limiter: 1.5A; All Other Ports Combined Output Current Limiter: 1.5A
Supported Interfaces (via Carrier Baseboard):
PWM Outputs: 16 Channels (8 Main I/O + 8 FMU Aux)
Serial Telemetry Ports: 3x General-Purpose UARTs (Telem1 with full flow control & 1.5A limit, Telem2 with full flow control, Telem3)
GPS Ports: 2x Ports (GPS1 full GPS + safety switch/buzzer; GPS2 basic GPS)
CAN Interfaces: 2x Independent CAN Buses (CAN1 & CAN2)
I2C Interface: 1x I2C Port (supports external sensor calibration EEPROM)
RC & S.BUS Interfaces: Dedicated Spektrum/DSM, S.BUS, CPPM, Analog/PWM RSSI input + Dedicated S.BUS output
Power Inputs: 2x Analog Power Input Ports
Debug Ports: 2x Ports (FMU Debug & I/O Debug)
Firmware Support: PX4 Autopilot (FMUv6C target, v1.13.2+) and ArduPilot (v4.2.3+)
Enclosure Material: CNC Aluminum Alloy
Dimensions: 44.8 mm × 44.8 mm × 13.5 mm
Net Weight: 36.0 grams
(1) Holybro Pix32 v6 Flight Controller Module (SKU: 11056)
| Name | Value |
|---|---|
| MANUFACTURER | Holybro |
| GTIN | 0618455045585 |