The EMAX E3 3115 Brushless Motor 900KV (Product Code: 0101096119)—part of the EMAX ECO III (E3) propulsion lineup—is a high-RPM, high-torque external-rotor brushless motor engineered for 8-inch to 10-inch long-range FPV drones, X-Class racers, and heavy-lift cinelifters operating on 4S to 6S LiPo power systems. Built on a 12N14P electromagnetic framework with a 3115 stator, this 900KV winding delivers rapid throttle response and high rotational authority on 10-inch propellers, achieving up to 1,925W of peak power (77A at 6S) and recording up to 4,580 grams of bench thrust at 25V (73.4A / 1,835W) on a GF 10×5×3 tri-blade propeller.
Constructed with a one-piece CNC-anodized AL 7075 aluminum outer rotor housing, high-temperature N52SH curved arc magnets, and low-resistance (42 m$\Omega$) single-strand copper windings, the E3 3115 900KV prioritizes thermal stability and mechanical durability under heavy dynamic loads. A hardened steel shaft supported by G1-level precision rolling-element bearings transfers torque smoothly to an M5 clockwise propeller adapter thread, while factory-soldered 270mm 18AWG silicone leads accommodate extended carbon fiber arms and weigh just 108 grams excluding wires.
4S–6S High-Response 900KV Windings: Tuned for 4S through 6S LiPo power systems driving 10-inch propellers, delivering 42 m$\Omega$ internal resistance, 77A peak current, and 1,925W maximum power output.
Anodized AL 7075 One-Piece Outer Rotor: Precision-machined 7075 aluminum rotor bell resists impact deformation and enhances heat dissipation during aggressive climbs and high-throttle bursts.
N52SH Arc Magnets & Single-Strand Windings: High-coercivity N52SH curved magnets paired with single-strand copper windings preserve magnetic efficiency and resist thermal demagnetization under heavy current draw.
Hardened Steel Shaft & G1 Precision Bearings: 5mm internal steel bearing shaft supported by G1-grade rolling-element bearings provides smooth, low-vibration rotation for clean flight controller gyro tracking.
Extended 270mm 18AWG Silicone Leads: Pre-installed 270mm high-strand silicone wires reach central ESCs or arm-mounted single ESCs on 8-inch to 10-inch frames without splicing.
Standard 19x19mm Mounting & M5 Prop Interface: Industry-standard 19x19mm M3 mounting pattern and M5 clockwise prop shaft integrate seamlessly with macro FPV frames and 10-inch propellers.
Product Code / MPN: 0101096119
KV Rating: 900KV
Stator Size: 3115 (31.0 mm diameter x 15.0 mm height)
Framework / Configuration: 12N14P (External-Rotor Architecture)
Input Voltage / Cell Count: 4S – 6S LiPo
Idle Current (at 10V): 1.7 A
Internal Resistance: 42ohm
Peak Current (at 6S): 77 A
Maximum Power (at 6S): 1,925 W
Max Bench Test Thrust (EMAX Load Sheet): 4,580 g (at 25V / 73.4A / 1,835W with GF 10×5×3 prop)
Rotor Housing Material: Anodized AL 7075 Aluminum Alloy (One-Piece Outer Rotor)
Magnets & Windings: N52SH Curved Arc Magnets; Single-Strand Copper Windings
Shaft Material & Thread: Hardened Steel Shaft; M5 Clockwise (CW) Propeller Thread
Internal Bearing Shaft Diameter: 5.0 mm
Bearing Specification: G1-Level Precision Rolling-Element Bearings
Mounting Bolt Pattern: 19.0 mm x 19.0 mm (M3)
Motor Lead Wires: 270 mm, 18AWG Silicone Wire
Overall Motor Dimensions: $\varnothing$38.8 mm x 48.6 mm
Net Weight: 108.0 grams (excluding silicone wires)
Recommended Propeller Size: 10-Inch Propellers (8-inch to 10-inch range across E3 3115 platform)
Target Applications: 8"–10" Long-Range FPV Drones, X-Class Racing Drones, Heavy-Lift Cinelifters, and Macro Multirotors
(1) EMAX E3 (ECO III) 3115 900KV Brushless Motor
(5) M3 x 10mm Mounting Screws
(1) Aluminum M5 Nylock Propeller Nut
(1) Propeller Shaft Screw
(1) Shaft Washer
| Name | Value |
|---|---|
| MANUFACTURER | EMAX |
| STATOR DIAMETER | 31 |
| STATOR HEIGHT | 15 |
| KV | 900 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |
| GTIN | 769283960400 |